typo in hinge.svg

Black 6mm rectangle should have a height of 22.56, with the lower hole 6mm from the bottom, and the top hole 5.28 from the top. It was off by 0.28mm so hardly noticable with the kerf of the laser, but we may as well make it exact.
Add redrawn STEP files
2025-12-05 23:20:26 -08:00 · 2025-10-08 12:07:19 +01:00 · 2025-10-08 11:55:02 +01:00 · 2025-10-08 11:54:08 +01:00 · 2025-10-08 11:24:02 +01:00 · 2025-10-08 11:08:22 +01:00
11 changed files with 4784 additions and 6 deletions
--- a/cad/hinge.svg
+++ b/cad/hinge.svg
@@ -29,7 +29,7 @@
 <g>
 <circle cx="10" cy="47.28" r="1.5"/>
 <circle cx="10" cy="36" r="1.5"/>
-<polyline points="16,53.28 4,53.28 4,31 16,31 16,53.28"/>
+<polyline points="16,53.28 4,53.28 4,30.72 16,30.72 16,53.28"/>
 </g>

 <!-- White 3mm Delrin -->
--- a/cad/main-3dprints-RevC/colons-revC.stl
+++ b/cad/main-3dprints-RevC/colons-revC.stl
--- a/cad/main-3dprints-RevC/ldr.stl
+++ b/cad/main-3dprints-RevC/ldr.stl
--- a/cad/main-3dprints-RevC/switchcover.stl
+++ b/cad/main-3dprints-RevC/switchcover.stl
--- a/cad/main-3dprints-RevD/Colons.step
+++ b/cad/main-3dprints-RevD/Colons.step
--- a/cad/main-3dprints-RevD/Phototransistor.step
+++ b/cad/main-3dprints-RevD/Phototransistor.step
--- a/cad/main-3dprints-RevD/Switchcover.step
+++ b/cad/main-3dprints-RevD/Switchcover.step
--- a/cad/main-3dprints-RevD/colons-revD.stl
+++ b/cad/main-3dprints-RevD/colons-revD.stl
--- a/cad/main-3dprints-RevD/phototransistor.stl
+++ b/cad/main-3dprints-RevD/phototransistor.stl
--- a/cad/main-3dprints-RevD/switchcover.stl
+++ b/cad/main-3dprints-RevD/switchcover.stl
--- a/qspi/config.txt
+++ b/qspi/config.txt
@@ -77,11 +77,12 @@ Tolerance_time_100ms = 100000


 # nonlinear brightness curve, five stops of input->output, use brightness-curve.htm for a GUI
-#BS1 = 0,0
-#BS2 = 1425,737
-#BS3 = 2566,1601
-#BS4 = 3396,2725
-#BS5 = 4095,4095
+# VTT9812FH with R11 = 470K
+BS1 = 0,0
+BS2 = 131,365
+BS3 = 1076,1422
+BS4 = 2774,2665
+BS5 = 3849,4095

 # shows input and output values of DAC/ADC
 MODE_DEBUG_BRIGHTNESS = 0
Author	SHA1	Message	Date
mitxela	8af0b73a77	typo in hinge.svg Black 6mm rectangle should have a height of 22.56, with the lower hole 6mm from the bottom, and the top hole 5.28 from the top. It was off by 0.28mm so hardly noticable with the kerf of the laser, but we may as well make it exact.	2025-10-08 12:07:19 +01:00
mitxela	0dc65df840	Add redrawn STEP files These don't exactly match the STL files although both will work. STL files were generated from the OpenSCAD file. STEP files were redrawn with some fillets and other tweaks, moving forwards the step files may be the main reference	2025-10-08 11:55:02 +01:00
mitxela	9e6b0c1afa	Move main STL files into folders for rev C, rev D	2025-10-08 11:54:08 +01:00
mitxela	f5113a92e4	Set brightness curve in config file for phototransistor The default curve in the firmware, with nothing specified in the config file (or this commented out) matches the LDR.	2025-10-08 11:24:02 +01:00
mitxela	67010598d9	add STL for phototransistor (VTT9812FH)	2025-10-08 11:08:22 +01:00